CB6K ring size question

[belocked]

I've been wearing a CB6K off and on for a while using the 2nd biggest ring and 2nd smallest sizer. Sometimes I barely notice it's there, but at other times when I'm excited it seems the ring size is too small and things get squeezed pretty hard on the left side. The bigger ring seems too loose when I'm relaxed and I can get 2 fingers under it. Would it work better if I go to the bigger ring but the smaller spacer?

I've just received the MM sizing rings so I can order a JB, but I can't measure anything until my K/H unlocks me from the CB6K.

[TwistedMister]

...when I'm excited it seems the ring size is too small and things get squeezed pretty hard on the left side.

Yeah, that's pretty much the way it works- anything that is small enough to stay on when you are not aroused, is going to get pretty tight when you *are* aroused...especially if you are a 'grower'. For many (both keyholders and the locked ones), this is part of the 'appeal'. There are even ways of magnifying this effect- such as the 'Points of Intrigue' available for the CBx devices (which, depending on size, can induce varying levels of pain)- keyholders who enjoy tormenting their chastity 'slave' and/or the locked ones who have a masochistic bent may enjoy this additional discomfort.

As long as you have no circulation issues, and the ring is not so small that it is causing physical damage (bruising, abrasions) and excessive pain, then it is something that you will need to learn to cope with.

I'm not sure what you mean when you say "...on the left side...", given the roundness of the device, I don't see how anything could be much different from one 'side' to the other...unless your testicles are not evenly distributed within the device- more pressure on one than on the other. I've noticed with myself that sometimes they do not descend and retract evenly, and this can cause some discomfort on 'one side' as opposed to the other. This can sometimes be solved by pulling more scrotum skin through the ring.

The bigger ring seems too loose when I'm relaxed and I can get 2 fingers under it.

Two fingers is probably too much (and, I think, contrary to the instructions for MM sizing). You will definitely need to get the sizing issue sorted out before you drop a bunch of dough for MM metal.

[belocked]

Thanks for the feedback. Yeah, I'm a grower, and high and tight with it. But I don't understand what was different this time; I managed 6 days 24/7 recently with a smaller ring but it felt different from the start this week.

I'm not sure what you mean when you say "...on the left side...", given the roundness of the device, I don't see how anything could be much different from one 'side' to the other...unless your testicles are not evenly distributed within the device- more pressure on one than on the other. I've noticed with myself that sometimes they do not descend and retract evenly, and this can cause some discomfort on 'one side' as opposed to the other.

My left testicle is considerably larger than the right one, and it's the right one which is looking to escape.

Oh well, I've been released as it really felt like I was risking internal injury today, so now I can start using the MM sizing rings.

[Ripvantinkle]

It am also on the largest ring with a cb6 copy, two fingers as well when relaxed, I have been having problems recently on the right side, my Vasectomy scaring seems to be right where the ring sits and is giving me some jipp. I have just ordered a silicone CB600s again a copy based on the price. Hopefully this will fit better as the second size down seems to be the best but in my eagerness to get out a while ago I broke it where the pin goes through. hopefully the silicone will stay closer to my body than the loose polycarbon ring currently in use.

[lex83]

Maybe it is just me but my balls do not fit comfortably or easily in any of the rings. They are tighter against my body than others (according to my wife's field research) and don't know if that is a factor or not.

[belocked]

Some days I just need a bigger ring than other days without any clear reason why. I want to order an MM JB but I'm struggling with sizing the ring.

[WifeIsVanilla]

I only have the one ring for my JB, and for me that seems to work fine, but several here have reported that they ordered 2 different size rings for their MM products right off the bat, and have had good results.

[belocked]

I only have the one ring for my JB, and for me that seems to work fine, but several here have reported that they ordered 2 different size rings for their MM products right off the bat, and have had good results.

Good idea, but any ideas how to change the ring while locked 24/7?? Surely the whole point of a JB is that you don't need to remove it for hygienic or any other reasons. At least I think I'm close to deciding on the right ring size using the MM plastic rings.

[Atone]

Good idea, but any ideas how to change the ring while locked 24/7??

I can and have changed the rings on my Steelheart without removing the tube from my penis. It has to be unlocked of course but it can be done depending on the relative size of the ring to the tube. Once it is unlocked I push the balls through the ring and then the ring goes over the lock part of the tube first and then slides all the way around the tube. The other ring goes on in the reverse. The hardest part is pushing the balls back through the ring. I don't remember why I did it, maybe just to see if could be done.

[MikeyLikes]

I know this has been mentioned in several other threads, but lubrication between the base ring and the wearer's skin is vitally important with the CB- xxxx devices. I found that if I didn't apply adequate lubrication, the result would be excessive pulling/burning sensations - very uncomfortable.