After using a bent tube in several different units, some worked better than others, I was trying to find a U-tube that was comfortable and compatible with different cages. Searching around I found several with permanent balls or "ends" that would not let them go inside me or slip out of cage.
I ordered them finding two that fit nicely, I use the longer one for the longer cages finding that with a snug glans ring (not attached to cage) really made a difference in sensations and keeping me centered and filling the cage.
With my shorter cages I used one that was about 3.5 inches long with a flat head, Immediately I liked it, no more pinching at odd times, mostly when flexing or picking up something heavy and when worn with the mounted glans ring unit it keeps me aimed perfectly between the bars.
I was able to start using the ten mm wide tube stopped 90% of leakage having only one complaint was the 3 mm opening seemed too small.
Few days ago I drilled out hole to slightly larger than 4mm and now my flow issues have stopped and no leakage under pressure.
I know it seems odd to not have it attached but since its loose and longer than unit I cannot pull off the U-tube while caged, it just wont let me pull it all the way out. With the U-tube loose I've had no more pinching issues only occasionally hearing a light ticking noise but rarely and I found it very exciting. I am not sure if this makes any sense but having the U-tube mounted to the cage isn't the only option.
With the set up I am in now The larger opening with wide collar at end of U-tube keeps everything lined up and very neat I haven't tried it yet but I think I could pee standing up.
I am enjoying experimenting still messing with long tube with it's own glans ring under cages, it fun because I can lock the glans ring bar to the cage bar keeping it in place while adding another locked on part, padlocks I have aren't perfect but looking for options.
Has anyone else had flow issues? Just felt like I couldn't fully empty bladder with smaller opening in tube.
Thanks I hope everyone has a good new year.
Mikel
Transition to steel urethral tube Log.
Re: Transition to steel urethral tube Log.
Currently locked in custom BA 34R, also use Ba-20 with triple base ring occasionally switched for BA 25 with double base ring.
- Mr Pickle
- Posts: 1552
- Joined: Sat Nov 16, 2019 4:58 am
- Last orgasm: November 11th, 1947
- Orgasms this year: 947
- Gender:
Re: Transition to steel urethral tube Log.
So a little update.
The original comfy cage whuch I took such pains to get used to has been replaced mainly with a two cm jobbie.
No Problems still. This cage will be on permanently for a seven week period with nonunlocking for any reasin whatsoever. I am of course hoping there is a little wiggle room with that. Just a bit would be nice
The original comfy cage whuch I took such pains to get used to has been replaced mainly with a two cm jobbie.
No Problems still. This cage will be on permanently for a seven week period with nonunlocking for any reasin whatsoever. I am of course hoping there is a little wiggle room with that. Just a bit would be nice
Me. "I only got 30 seconds, that's not fair". C. "life's not fair, suck it up" 

Re: Transition to steel urethral tube Log.
Hello, I’m looking for a place to source the urethral tubes. Is there a web site that has various parts? If so could you share? Thanks in advancemikel2411 wrote: ↑Thu Dec 19, 2024 4:36 pm After using a bent tube in several different units, some worked better than others, I was trying to find a U-tube that was comfortable and compatible with different cages. Searching around I found several with permanent balls or "ends" that would not let them go inside me or slip out of cage.
I ordered them finding two that fit nicely, I use the longer one for the longer cages finding that with a snug glans ring (not attached to cage) really made a difference in sensations and keeping me centered and filling the cage.
With my shorter cages I used one that was about 3.5 inches long with a flat head, Immediately I liked it, no more pinching at odd times, mostly when flexing or picking up something heavy and when worn with the mounted glans ring unit it keeps me aimed perfectly between the bars.
I was able to start using the ten mm wide tube stopped 90% of leakage having only one complaint was the 3 mm opening seemed too small.
Few days ago I drilled out hole to slightly larger than 4mm and now my flow issues have stopped and no leakage under pressure.
I know it seems odd to not have it attached but since its loose and longer than unit I cannot pull off the U-tube while caged, it just wont let me pull it all the way out. With the U-tube loose I've had no more pinching issues only occasionally hearing a light ticking noise but rarely and I found it very exciting. I am not sure if this makes any sense but having the U-tube mounted to the cage isn't the only option.
With the set up I am in now The larger opening with wide collar at end of U-tube keeps everything lined up and very neat I haven't tried it yet but I think I could pee standing up.
I am enjoying experimenting still messing with long tube with it's own glans ring under cages, it fun because I can lock the glans ring bar to the cage bar keeping it in place while adding another locked on part, padlocks I have aren't perfect but looking for options.
Has anyone else had flow issues? Just felt like I couldn't fully empty bladder with smaller opening in tube.
Thanks I hope everyone has a good new year.
Mikel
Re: Transition to steel urethral tube Log.
Hi Dervil
I got mine from e-bay, etsy and amazon. They were not expensive giving me to opportunity to get a lot of different kinds and sizes.
I haven't found a "good" source mainly because when I have looked at them they weren't what I wanted or the site had same as others listed for a whole lot more money. The tubes are pretty simple and I have had no issues with any of them as far as finish, it's a tube LOL.
As long as it's smooth and clean it works. I did find while polishing one I had modified a little I could buff the stainless off whatever the inner material was, still use the tube with no issues.
I was planning on locating more quality tubes when I got ready but have not yet found any I'm interested in, especially since the cheaper ones seem to be fine.
Mikel
I got mine from e-bay, etsy and amazon. They were not expensive giving me to opportunity to get a lot of different kinds and sizes.
I haven't found a "good" source mainly because when I have looked at them they weren't what I wanted or the site had same as others listed for a whole lot more money. The tubes are pretty simple and I have had no issues with any of them as far as finish, it's a tube LOL.
As long as it's smooth and clean it works. I did find while polishing one I had modified a little I could buff the stainless off whatever the inner material was, still use the tube with no issues.
I was planning on locating more quality tubes when I got ready but have not yet found any I'm interested in, especially since the cheaper ones seem to be fine.
Mikel
Currently locked in custom BA 34R, also use Ba-20 with triple base ring occasionally switched for BA 25 with double base ring.
Re: Transition to steel urethral tube Log.
Thanks for the reply, I see kinda the same stuff across the websites. From reading around on here I’m a little nervous about using the silicone tubes, and as for myself like Mr. Pickle the entry is/was small, 5mm. I’ve been dilating I’ve gotten up to 7.5mm so I just wanted to see the different sizes available. I think the UT is the only way to go for short term and long term use. I found being able to back out of the devices makes them pretty much useless.mikel2411 wrote: ↑Sun Jan 26, 2025 10:45 am Hi Dervil
I got mine from e-bay, etsy and amazon. They were not expensive giving me to opportunity to get a lot of different kinds and sizes.
I haven't found a "good" source mainly because when I have looked at them they weren't what I wanted or the site had same as others listed for a whole lot more money. The tubes are pretty simple and I have had no issues with any of them as far as finish, it's a tube LOL.
As long as it's smooth and clean it works. I did find while polishing one I had modified a little I could buff the stainless off whatever the inner material was, still use the tube with no issues.
I was planning on locating more quality tubes when I got ready but have not yet found any I'm interested in, especially since the cheaper ones seem to be fine.
Mikel
- Mr Pickle
- Posts: 1552
- Joined: Sat Nov 16, 2019 4:58 am
- Last orgasm: November 11th, 1947
- Orgasms this year: 947
- Gender:
Re: Transition to steel urethral tube Log.
I have only seen a few and some not so good.
Ternence have some available that are decent.
I have ordered the following cage simply for the urethral.
https://search.app/4UQrQwF7gKNxXeS77
Shame I couldn't find it separately but it has the flared base which I like so ill give it a try with that cage and the flat.
Ternence have some available that are decent.
I have ordered the following cage simply for the urethral.
https://search.app/4UQrQwF7gKNxXeS77
Shame I couldn't find it separately but it has the flared base which I like so ill give it a try with that cage and the flat.
Me. "I only got 30 seconds, that's not fair". C. "life's not fair, suck it up" 

Re: Transition to steel urethral tube Log.
This is the one I'm using right now from amazon, I couldn't get a proper link so I copied the header on the ad.
"(Urinary Plug 50mm Long Stainless Steel Catheters Male Sound urethral Dilator Inserts Penis Plug for Men, 14 Sizes Optional G010 (10mm)"
Amazon has multiple options a few "sets" where you can get multiples of different sizes pretty cheap to try out.
Stay away from silicone tubes, they can come apart and cause infections, I used one once long time ago and it never got comfortable either.
Give them a look.
Mikel
"(Urinary Plug 50mm Long Stainless Steel Catheters Male Sound urethral Dilator Inserts Penis Plug for Men, 14 Sizes Optional G010 (10mm)"
Amazon has multiple options a few "sets" where you can get multiples of different sizes pretty cheap to try out.
Stay away from silicone tubes, they can come apart and cause infections, I used one once long time ago and it never got comfortable either.
Give them a look.
Mikel
Currently locked in custom BA 34R, also use Ba-20 with triple base ring occasionally switched for BA 25 with double base ring.
- Mr Pickle
- Posts: 1552
- Joined: Sat Nov 16, 2019 4:58 am
- Last orgasm: November 11th, 1947
- Orgasms this year: 947
- Gender:
Re: Transition to steel urethral tube Log.
That description didn't give me any results unfortunately.
Last edited by Mr Pickle on Mon Jan 27, 2025 6:01 pm, edited 1 time in total.
Me. "I only got 30 seconds, that's not fair". C. "life's not fair, suck it up" 

Re: Transition to steel urethral tube Log.
Sorry Mr.P
Try this one, www.amazon.com/gp/product/B087C39XCJ/re ... =UTF8&th=1
Or just search urethral tube I think that's how I found it to begin with.
Mikel
Try this one, www.amazon.com/gp/product/B087C39XCJ/re ... =UTF8&th=1
Or just search urethral tube I think that's how I found it to begin with.
Mikel
Currently locked in custom BA 34R, also use Ba-20 with triple base ring occasionally switched for BA 25 with double base ring.
-
- Posts: 755
- Joined: Tue Apr 16, 2024 7:28 am
- Gender:
Re: Transition to steel urethral tube Log.
I came over here to continue on the tube subject. I tried a flat with an 8mm tube problem was a urinary mess. Several years ago I played with sounding and used a 10mm to get a snug fit. As a result I’m sure I need at least a 10 mm tube to stay pee clean. I’m sure I’m up against a custom order but $$ is an issue. I am considering a ternance product that has a restrictive ball that creates almost an inch of negativity. I was thinking that might keep me cleaner.
I am eager to go flatter than my 2 cm jobby and am tired of watering my balls. I am looking for anyone’s experience in this area. I would like to make this available for her as she seems to like keeping it small.
https://www.amazon.com/TERNENCE-Chastit ... y-Negative
I hope the link works.
I am eager to go flatter than my 2 cm jobby and am tired of watering my balls. I am looking for anyone’s experience in this area. I would like to make this available for her as she seems to like keeping it small.
https://www.amazon.com/TERNENCE-Chastit ... y-Negative
I hope the link works.
She says ‘it’s cute’ in the nub. 
