How does one tell the good from the bad?
Time for a new device
-
- Posts: 3765
- Joined: Thu Nov 10, 2011 5:49 pm
- Location: Northern New England
- Last orgasm: October 21st, 2020
- Orgasms this year: 4
- Gender:
Re: Time for a new device
0 x
04/07/19 "And then I 'punished' you by making you lick my pussy after I let my other 'boy' fuck me." --Mrs. Twisted
Re: Time for a new device
I was a little surprised yesterday. I recently ordered another DHGate A271 mainly to have a spare integral lock and a smaller 40MM arc ring. My spouse unlocked me yesterday so I could try the smaller ring. To my chagrin, the two pins on the cage would not go into the holes on the arc ring, not even close. The holes were drilled way wider than the pins on my cage. Guess they are all made to fit the cage that comes with them. I bought the whole device because it was cheaper than just a new ring. Guess it is going in the trash
0 x
Wishful4
Current Device: DhGate A271
Current Device: DhGate A271
- locked4her55
- Posts: 2236
- Joined: Sat Feb 25, 2012 10:23 pm
- Location: Massachusetts, USA
- Gender:
Re: Time for a new device
Same with me. The cages are not interchangeable with the rings between my A271 & A273 and I purchased both devices from the same seller.
0 x
Happily secured since 4/2010
Have worn CB3000, CB6000s, MM Jail Bird & Watchful Mistress,
DHgate A271 & 273, DHgate Full Stainless Steel Belt & DHgate HT nub
Currently wearing A273
Have worn CB3000, CB6000s, MM Jail Bird & Watchful Mistress,
DHgate A271 & 273, DHgate Full Stainless Steel Belt & DHgate HT nub
Currently wearing A273
- KittensBoyToy
- Posts: 1235
- Joined: Tue Jun 19, 2018 4:43 pm
- Location: Texas Hill Country
- Gender:
Re: Time for a new device
The holes were drilled way wider than the pins on my cage.
If you have access to a drill press you should be able to drill new holes.
If you have access to a drill press you should be able to drill new holes.
0 x
Kitten's Boy Toy
I'm Kitten's property and She keeps Her property secure in a Jail Bird!
I'm Kitten's property and She keeps Her property secure in a Jail Bird!
- Tom Allen
- Site Admin
- Posts: 5429
- Joined: Sat Sep 25, 2010 9:27 pm
- Location: Southern New England, USA
- Last orgasm: April 1st, 2018
- Orgasms this year: 0
- Contact:
Re: Time for a new device
Interestingly, I bought an A272, an A274, and (I think) an A273 at the same time from the same seller. The A273 was just to get one of those ball splitter base rings. However, all of them were interchangeable for me. The A272 I cut up to experiment with, and ended up making a cock ring from the cast cuff ring. The ball splitter, I discovered, looked cool, but was impractical for daily wear.
That said, I'm under the impression that there is one company doing the casting, but possibly different shops doing the machining, or possibly, a different shop from the place doing the welding. And if the pins are quite a bit different, it's also possible that somebody made a mistake, so instead of scrapping a bunch, they decided to make the cages to fit.
That said, I'm under the impression that there is one company doing the casting, but possibly different shops doing the machining, or possibly, a different shop from the place doing the welding. And if the pins are quite a bit different, it's also possible that somebody made a mistake, so instead of scrapping a bunch, they decided to make the cages to fit.
1 x
Tom Allen
The Edge of Vanilla
Denial Permanente
The Edge of Vanilla
Denial Permanente
- Tom Allen
- Site Admin
- Posts: 5429
- Joined: Sat Sep 25, 2010 9:27 pm
- Location: Southern New England, USA
- Last orgasm: April 1st, 2018
- Orgasms this year: 0
- Contact:
Re: Time for a new device
Also, the cuff ring could probably be drilled to accept the different cage pins, but you would need to carefully fixture it in a vice, surrounded by some wood, and use a decent drill bit meant for stainless. Not everybody has a drill press hanging around, although I can't imagine why.
0 x
Tom Allen
The Edge of Vanilla
Denial Permanente
The Edge of Vanilla
Denial Permanente
Re: Time for a new device
No drill press here, either. But I do need to get that vice I bought like 6 months ago mounted on my workbench!Tom Allen wrote: ↑Wed Nov 06, 2019 10:45 am Also, the cuff ring could probably be drilled to accept the different cage pins, but you would need to carefully fixture it in a vice, surrounded by some wood, and use a decent drill bit meant for stainless. Not everybody has a drill press hanging around, although I can't imagine why.
0 x
-Dan
and yes, that IS my beautiful hotwife wearing the key to my cb-6000s!
Currently Own: CB-6000s, Steelworxx Steelheart (2), modified Steelworxx Looker 3, and DH Gate A271 (2)
Currently Wearing: Steelheart
and yes, that IS my beautiful hotwife wearing the key to my cb-6000s!
Currently Own: CB-6000s, Steelworxx Steelheart (2), modified Steelworxx Looker 3, and DH Gate A271 (2)
Currently Wearing: Steelheart
- Bird in a Cage
- Posts: 243
- Joined: Fri Feb 05, 2016 4:38 pm
- Location: A Gaijin in Japan
Re: Time for a new device
[/quote]
No drill press here, either. But I do need to get that vice I bought like 6 months ago mounted on my workbench!
[/quote]
Take it to your father-in-law’s garage... I’m sure he wouldn’t mind helping adjust your device for his daughter’s pleasure. LOL.
No drill press here, either. But I do need to get that vice I bought like 6 months ago mounted on my workbench!
[/quote]
Take it to your father-in-law’s garage... I’m sure he wouldn’t mind helping adjust your device for his daughter’s pleasure. LOL.
2 x
...
Securely within an MCN Adaptus.
Securely within an MCN Adaptus.