Jail Bird PA option?

For the gearheads in the audience
User avatar
Dev
Posts: 1192
Joined: Sun Sep 26, 2010 6:10 am
Location: New England, USA
Contact:

Re: Jail Bird PA option?

Post by Dev »

I'd also be concerned about the seam rotating inside my piercing and causing irritation.
I don't have a PA (obviously) and my rings are nowhere near a 4 ga (um, 12 I believe. Or maybe 14 g. Can't remember). But I have been wearing these rings (the ones I posted a picture of) for 2+ years with absolutely no problem. I can't feel anything and I have to really study the ring to even see where the little segment is. I haven't tried to open them since they were put in (by the piercer) back in August 2008. (As I have said before, I am a wimp and won't change my own jewelry.)

If you buy good quality jewelry, I don't think the seam is going to be a problem. Cheap stuff, from that store at the mall, is another issue altogether...

D
0 x
The Key is on my Nipple Ring
a couple's explorations with a chaste life, from the wife's point of view
Dev's Gallery
my stash of good looking men
Keyheld: Chastity Resources for Lovers
Chastehusband
Posts: 99
Joined: Sat Sep 25, 2010 9:27 pm
Location: Naperville, IL
Contact:

Re: Jail Bird PA option?

Post by Chastehusband »

Atone wrote:I agree, and use one of these

http://www.traeume-aus-edelstahl.com/in ... 000e0ac54b

hope that long link works or try this http://tinyurl.com/23ozeko

-A
With slight modification, I wonder if something like this could be used in place of a padlock, much more streamlined!
0 x
User avatar
thumper
Site Admin
Posts: 599
Joined: Sat Sep 25, 2010 6:06 pm
Location: Minneapolis, MN
Contact:

Re: Jail Bird PA option?

Post by thumper »

Mr. MM (that mysterious figure) says he can add the bar I mentioned for an additional $30.
0 x
Denying Thumper is my blog, Thumper's Portfolio is my porn stash.

Currently wearing: Steelworxx Steelheart
Is also allowed to wear: Mature Metal Jailbird, Steelworxx Looker 02
User avatar
Dev
Posts: 1192
Joined: Sun Sep 26, 2010 6:10 am
Location: New England, USA
Contact:

Re: Jail Bird PA option?

Post by Dev »

His name is actually Bill but he seems to like to maintain a somewhat anonymous facade. :D Of course, now that I have ordered a second device from him, we're new BFFs.

D
0 x
The Key is on my Nipple Ring
a couple's explorations with a chaste life, from the wife's point of view
Dev's Gallery
my stash of good looking men
Keyheld: Chastity Resources for Lovers
User avatar
thumper
Site Admin
Posts: 599
Joined: Sat Sep 25, 2010 6:06 pm
Location: Minneapolis, MN
Contact:

Re: Jail Bird PA option?

Post by thumper »

Belle has approved our acquisition of a Jail Bird, so I think that's what we're going to do. This isn't due to any unhappiness with the Steelheart. I'm only interested in the variety of experience multiple devices will afford.

So anyway, I have a question for the JB users in the house (and maybe this has been discussed elsewhere already). It's such a tight fit. Where's the erection go? I imagine part of it gets extruded out the sides and the rest stays up in the body and pushed the device forward against the balls. Correct?

Once Bill lets me know how to pay him for the thing (the $30 PA bar's not an option on his site), I'll start the waiting game. And then we'll have five (count 'em, 5) devices.

For the record, I'm not opting for the spikes or the anti-pull out stuff. If the bar doesn't work, I'll wear it like all the mere mortals do. My specs are:

Round ring
.38 gap (not really sure, so going with what most guys get)
2 1/2" cage
1 5/8" ring
1 3/8" diameter

Measuring the cage length was the trickiest bit. Of course, my access is highly limited so I'm depending on older measurements and once from yesterday when I took my PA fixing out and once from today when I disassembled and cleaned everything. I came back with two 2.5" measurements and one 2.25" measurement. None of them were conducted when I was in any way aroused, so I decided to go with the longer one. My one concern is trying to make sure there's no pulling on the PA at any point. I suppose it's possible I get smaller than 2.25", but that would be under extreme conditions.

So anywho, that's the deal. I'm joining the Jail Bird club. Hope Belle likes it. Oh, and me, too.
0 x
Denying Thumper is my blog, Thumper's Portfolio is my porn stash.

Currently wearing: Steelworxx Steelheart
Is also allowed to wear: Mature Metal Jailbird, Steelworxx Looker 02
User avatar
Dev
Posts: 1192
Joined: Sun Sep 26, 2010 6:10 am
Location: New England, USA
Contact:

Re: Jail Bird PA option?

Post by Dev »

thumper wrote:Belle has approved our acquisition of a Jail Bird, so I think that's what we're going to do. This isn't due to any unhappiness with the Steelheart. I'm only interested in the variety of experience multiple devices will afford.
Congratulations and welcome to the club!
So anyway, I have a question for the JB users in the house (and maybe this has been discussed elsewhere already). It's such a tight fit. Where's the erection go? I imagine part of it gets extruded out the sides and the rest stays up in the body and pushed the device forward against the balls. Correct?
In Ab's case, nothing has come out the side and his is a pretty close fit diameter wise. His erections really aren't in his penis. Yes, it enlarges to the end of the cage (which doesn't take much to reach, he only has about 1/8" in there) but the rest gets pushed back. It's hard to describe, but the area behind his penis and balls gets engorged and full, like a big tree trunk. Although I can grasp and massage this engorged part, it doesn't seem to be particularly satisfying. The part that counts is all locked up.
Once Bill lets me know how to pay him for the thing (the $30 PA bar's not an option on his site), I'll start the waiting game. And then we'll have five (count 'em, 5) devices.
Like I said, the well-dressed chaste man can't have too many suits!
For the record, I'm not opting for the spikes or the anti-pull out stuff. If the bar doesn't work, I'll wear it like all the mere mortals do.
Yes, in our case, I think the pull-out pins were a waste of money.
Measuring the cage length was the trickiest bit. Of course, my access is highly limited so I'm depending on older measurements and once from yesterday when I took my PA fixing out and once from today when I disassembled and cleaned everything. I came back with two 2.5" measurements and one 2.25" measurement. None of them were conducted when I was in any way aroused, so I decided to go with the longer one. My one concern is trying to make sure there's no pulling on the PA at any point. I suppose it's possible I get smaller than 2.25", but that would be under extreme conditions.
Ab was wearing the CB-6000s which was 2 1/2" long. For the JB, I took it down to 2" and sort of freaked at that but he actually has a little bit of room. For the Watchful Mistress, Bill looked at this picture and suggested making the length 1 3/4", which I did. All the other measurements are the same.

Image


So anywho, that's the deal. I'm joining the Jail Bird club. Hope Belle likes it. Oh, and me, too.
I am sure you'll be very pleased. :D
0 x
The Key is on my Nipple Ring
a couple's explorations with a chaste life, from the wife's point of view
Dev's Gallery
my stash of good looking men
Keyheld: Chastity Resources for Lovers
User avatar
mikecb
Posts: 225
Joined: Mon Sep 27, 2010 5:58 am
Contact:

Re: Jail Bird PA option?

Post by mikecb »

thumper wrote:Belle has approved our acquisition of a Jail Bird, so I think that's what we're going to do. This isn't due to any unhappiness with the Steelheart. I'm only interested in the variety of experience multiple devices will afford.
.
Thumper, I saw your pictures suggesting the additional bar to secure the PA. So, how do you intend to put it on? Will you put on the cage, and then thread jewelry through and put in the bead? Is your thinking that once you lock it to the A-ring that you'll have inadequate access to remove the ring? I'm just curious since I'm sorely tempted to order "something" from MM with PA security, and I've been wondering how to achieve it.

mikecb
0 x
I want Chastity, not Celibacy

http://mikecbwearer.blogspot.com/
User avatar
thumper
Site Admin
Posts: 599
Joined: Sat Sep 25, 2010 6:06 pm
Location: Minneapolis, MN
Contact:

Re: Jail Bird PA option?

Post by thumper »

I'm planning on using my 4ga ring around the bar to secure the cage to the cock. I can't remove that ring without a tool and, conveniently, the tool is in a small lockbox already. All I have to do is give Belle the key to that, as well. I'm not exactly sure how I'll wedge the tools and the ring and the cage all together. It may not even be possible, I guess, but I figure it's worth a try. Worse case I'm out $30. I don't think the extra bar will effect how the device operates at all if I'm not using it.
0 x
Denying Thumper is my blog, Thumper's Portfolio is my porn stash.

Currently wearing: Steelworxx Steelheart
Is also allowed to wear: Mature Metal Jailbird, Steelworxx Looker 02
User avatar
Dev
Posts: 1192
Joined: Sun Sep 26, 2010 6:10 am
Location: New England, USA
Contact:

Re: Jail Bird PA option?

Post by Dev »

I don't think the extra bar will effect how the device operates at all if I'm not using it.
I wouldn't think it would make any difference at all. It's just another bar on the cage.

D
0 x
The Key is on my Nipple Ring
a couple's explorations with a chaste life, from the wife's point of view
Dev's Gallery
my stash of good looking men
Keyheld: Chastity Resources for Lovers
User avatar
mikecb
Posts: 225
Joined: Mon Sep 27, 2010 5:58 am
Contact:

Re: Jail Bird PA option?

Post by mikecb »

thumper wrote:I'm planning on using my 4ga ring around the bar to secure the cage to the cock. I can't remove that ring without a tool and, conveniently, the tool is in a small lockbox already. All I have to do is give Belle the key to that, as well. I'm not exactly sure how I'll wedge the tools and the ring and the cage all together. It may not even be possible, I guess, but I figure it's worth a try. Worse case I'm out $30. I don't think the extra bar will effect how the device operates at all if I'm not using it.
I agree. The very worst case is that the bar gets in the way, and you have to dremel it off. It may work well as you propose, or another option might be to fashion a security cable, like I use with my cb3k. I'm excited to see how it works for you. I'm in exactly the same boat, with a 4ga piercing. You're right. Without the pliers, there's no way in hell I'm getting the bead off!

Best of luck!
mikecb
0 x
I want Chastity, not Celibacy

http://mikecbwearer.blogspot.com/
Post Reply