What happens if you lose the keys on the intergrated lock?Atone wrote:I don't like the "Anatomical" ring and never wear it. I think the problem is that it creates too much gap and I find that uncomfortable.
I would definitely get the integrated lock, it is very solid and very discrete. It also uses a real key unlike many of the other integrated locks out there. Well worth the money in my opinion.
-A
Steelworxx Ring Discussion
-
- Posts: 69
- Joined: Tue Nov 22, 2011 8:28 pm
Re: Steelworxx Ring Discussion
0 x
Re: Steelworxx Ring Discussion
About the same as if you lose the keys to the master lock on most other devices. You are going to have to cut it off. I have never tried on the steelworxx lock cylinder but it would probably not be too difficult with a few basic tools. The lock is held in place by a brass tab on the end that is exposed. It would have to be broken off and ground down enough to drive the cylinder out. With a little care it could be done without damaging the device.Locked4Xtine wrote:What happens if you lose the keys on the intergrated lock?
-A
0 x
Re: Steelworxx Ring Discussion
I've aways assumed the business end of a heavy flat-headed screwdriver could snap the little brass locking tab off.Locked4Xtine wrote:Atone wrote:What happens if you lose the keys on the intergrated lock?
0 x
Denying Thumper is my blog, Thumper's Portfolio is my porn stash.
Currently wearing: Steelworxx Steelheart
Is also allowed to wear: Mature Metal Jailbird, Steelworxx Looker 02
Currently wearing: Steelworxx Steelheart
Is also allowed to wear: Mature Metal Jailbird, Steelworxx Looker 02
- celticqueens_sub
- Posts: 1234
- Joined: Tue Nov 09, 2010 3:31 pm
- Location: UK
- Contact:
Re: Steelworxx Ring Discussion
Evil burning sensation and loads of lube should help. Try gun oil silicone lube
0 x
Owned and loved by Celtic Queen. Her perception is my reality.
Http://www.celticqueen.co.uk
Checkout http://keyheld.blogspot.com/ for lots of good blogs with great advice
Http://www.celticqueen.co.uk
Checkout http://keyheld.blogspot.com/ for lots of good blogs with great advice
Re: Steelworxx Ring Discussion
I'm sure it would but it might not be clean enough of a break to get the cylinder out without a little more work. The same heavy flat-headed screwdriver would probably do the trick.thumper wrote: I've aways assumed the business end of a heavy flat-headed screwdriver could snap the little brass locking tab off.
-A
0 x
Re: Steelworxx Ring Discussion
Speaking of keys and the Steelworxx integrated lock...does anyone know if those key blanks can be found (and cut) in the US?Locked4Xtine wrote:
What happens if you lose the keys on the intergrated lock?
0 x
-Dan
and yes, that IS my beautiful hotwife wearing the key to my cb-6000s!
Currently Own: CB-6000s, Steelworxx Steelheart (2), modified Steelworxx Looker 3, and DH Gate A271 (2)
Currently Wearing: Steelheart
and yes, that IS my beautiful hotwife wearing the key to my cb-6000s!
Currently Own: CB-6000s, Steelworxx Steelheart (2), modified Steelworxx Looker 3, and DH Gate A271 (2)
Currently Wearing: Steelheart
Re: Steelworxx Ring Discussion
The manufacturer is Burg Wachter. I've found the product online, but I've never searched for key cutting for them. They're a big manufacturer, though, so while I doubt the local Home Depot can cut them, I suspect a locksmith or more specialized hardware store could.
0 x
Denying Thumper is my blog, Thumper's Portfolio is my porn stash.
Currently wearing: Steelworxx Steelheart
Is also allowed to wear: Mature Metal Jailbird, Steelworxx Looker 02
Currently wearing: Steelworxx Steelheart
Is also allowed to wear: Mature Metal Jailbird, Steelworxx Looker 02
-
- Posts: 69
- Joined: Tue Nov 22, 2011 8:28 pm
Re: Steelworxx Ring Discussion
Well, my balls are very low and loose...
So would the anatomical ring be good for me or does it work better with high and tight balls?
on a side note, i think my genitals are perfect for trapped ball devices! One ball is lower than the other and the balls are hung low so my 3 members are all lined up nicely for getting through a ring!
So would the anatomical ring be good for me or does it work better with high and tight balls?
on a side note, i think my genitals are perfect for trapped ball devices! One ball is lower than the other and the balls are hung low so my 3 members are all lined up nicely for getting through a ring!
0 x
Re: Steelworxx Ring Discussion
I would think you would be better off with the "regular" ring. Unless I'm cold, I hang pretty loose and am doing well with the normal rings on my Steelheart. The only member here that I can think of that likes the anatomical ring is Elwood in Chastity. Of course, we're all different!Locked4Xtine wrote:Well, my balls are very low and loose...
So would the anatomical ring be good for me or does it work better with high and tight balls?
on a side note, i think my genitals are perfect for trapped ball devices! One ball is lower than the other and the balls are hung low so my 3 members are all lined up nicely for getting through a ring!
0 x
-Dan
and yes, that IS my beautiful hotwife wearing the key to my cb-6000s!
Currently Own: CB-6000s, Steelworxx Steelheart (2), modified Steelworxx Looker 3, and DH Gate A271 (2)
Currently Wearing: Steelheart
and yes, that IS my beautiful hotwife wearing the key to my cb-6000s!
Currently Own: CB-6000s, Steelworxx Steelheart (2), modified Steelworxx Looker 3, and DH Gate A271 (2)
Currently Wearing: Steelheart