Chastity Forums

My latest security hook, for a HTv2. I am using a new wire, made of the same stainless steel grade as the TetherSpout, thus avoiding any galvanic corrosion (I have experienced some of that with my previous wires):

Why bother with gluing nuts onto the HTv2? Just drill the proper size hole and tap it for the set screw thread. Note that you can buy stainless steel "security" set screws that require a slightly less common wrench for security (e.g. from http://www.losspreventionfasteners.com/products/tam...

My recall of using the KSD-G3 with a CB6000s was that it either hurt due to overpressure on my shaft (the tighter KSD) or it didn't prevent pull-out (e.g. soaped up, in the shower). I don't recall removal being a problem either, even with the tight one: unlock, apply a bit of lubricant to the top, a...

I second that endorsement of 2Toms sportshield

I was getting reacquainted with my HolyTrainer a week ago (to try a new TetherSpout locking wire design I made for another person) and I experienced a surprising instance of complete testicle escape. Apparently, my crotch had somehow gotten warm enough for the base ring to soften and flex enough for...

I don't get how this motivates the keyholder to loose weight.

A true stainless steel shouldn't do that. But, I have seen a little black stuff around the sleeve and pin on my JB. Stainless steel devices are often polished using a tumbling process with ceramic beads and polishing compounds. This works very well on external surfaces but does not do a good job in...

I highly recommend ordering a set of sizing rings from Mature Metal

once an attachment is screwed on a threaded spout it cannot be removed without the 3.5mm hex key: the spout would otherwise rotate solidly with the attachment. This could be used as security fix. Note that 3.5mm hex keys are quite easy to procure. Any hardware store worth its salt carries metric he...

I though about a flexible shackle padlock, such as this one http://www.masterlock.com/personal-use/product/4688D which has a 3mm diameters shackle but I'm not sure if the plug at the end of the shackle will pass through the spout hole. I'll ask the manufacturer I actually have one of those! It came...