I've been really happy with my A272 tube; it's at least as comfortable as my old CB3000, and it's even more secure.
But naturally, we always wonder if there's something just a little bit better out there. I've noticed what looks like a Fort cage that's been cut and welded to fit the integrated lock cuff ring, which I might try just for the hell of it, even though I'm sure it will be heavy.
But I'm also looking at a Holy Trainer style cage, if only because so many people seem to like the way they fit. I found a shorter version in stainless steel that's inexpensive enough to try out. But I'm wondering if any of you HT aficionados have any input as to the ring size.
On the devices I linked above, I use the 45 mm ring (1.77") because it's the most comfortable and keeps the cage in place. But because the HT slips under the cuff ring, I wondered if there was a trick to figuring out what size to wear? The sizes listed say "about" 40, 45, and 50 mm - I'm assuming because the ring is not perfectly round. And I see that the unit is 300 grams (about 10 oz).
Any suggestions?
Stainless steel Holy Trainer rings
-
- Posts: 3765
- Joined: Thu Nov 10, 2011 5:49 pm
- Location: Northern New England
- Last orgasm: October 21st, 2020
- Orgasms this year: 4
- Gender:
Re: Stainless steel Holy Trainer rings
If you scroll through the pics, you will see that it gives the dimension of the longest part of the 'ring' as 45mm, which means that the short dimension is somewhat less. I don't have the math skill to compute the inner area as opposed to a 45mm round ring.Tom Allen wrote:The sizes listed say "about" 40, 45, and 50 mm - I'm assuming because the ring is not perfectly round.
0 x
04/07/19 "And then I 'punished' you by making you lick my pussy after I let my other 'boy' fuck me." --Mrs. Twisted
- Tom Allen
- Site Admin
- Posts: 5426
- Joined: Sat Sep 25, 2010 9:27 pm
- Location: Southern New England, USA
- Last orgasm: April 1st, 2018
- Orgasms this year: 0
- Contact:
Re: Stainless steel Holy Trainer rings
I also searched our boards to see if anyone has compared the CBX style round rings to the HT rings, and the consensus seemed to be that the 45mm was the more popular. I thought I remembered someone writing that they wore the No 2 or No 3 ring (1-7/8 and 1-3/4) and went to the 45mm, but I don't have any confirmation. I used duckduckgo.gom and put in some search terms, but nothing specific came up.TwistedMister wrote: If you scroll through the pics, you will see that it gives the dimension of the longest part of the 'ring' as 45mm, which means that the short dimension is somewhat less. I don't have the math skill to compute the inner area as opposed to a 45mm round ring.
0 x
Tom Allen
The Edge of Vanilla
Denial Permanente
The Edge of Vanilla
Denial Permanente
-
- Posts: 8
- Joined: Mon Dec 11, 2017 12:29 pm
- Location: Northern Ohio
Re: Stainless steel Holy Trainer rings
Holy Trainer used to have a chart on their site correlating CB6000 rings to HT rings but I couldn’t find it yesterday.
0 x
-
- Posts: 392
- Joined: Sat Feb 09, 2013 12:44 pm
- Contact:
Re: Stainless steel Holy Trainer rings
Related to ring sizes, I bought this cage
https://www.dhgate.com/product/stainles ... 2017-12-07
and with some limited testing, I enjoy it so far. Problem is that I used the ring size for my CB-6000S and it may be a little too big. I should have ordered a couple of extra rings. Anyway, I have to get some sort of lube on to put the ring on, but that causes "slippage" over the top that doesn't seem to go away. It's as if I need lube to put it on, then I need the lube off. Are there different types to try for this? I am wondering if even a smaller ring size would have the same problem. Appreciate any thoughts.
Cheers
ps, sorry, I couldn't figure out how to embed the lengthy url
https://www.dhgate.com/product/stainles ... 2017-12-07
and with some limited testing, I enjoy it so far. Problem is that I used the ring size for my CB-6000S and it may be a little too big. I should have ordered a couple of extra rings. Anyway, I have to get some sort of lube on to put the ring on, but that causes "slippage" over the top that doesn't seem to go away. It's as if I need lube to put it on, then I need the lube off. Are there different types to try for this? I am wondering if even a smaller ring size would have the same problem. Appreciate any thoughts.
Cheers
ps, sorry, I couldn't figure out how to embed the lengthy url
0 x
- Tom Allen
- Site Admin
- Posts: 5426
- Joined: Sat Sep 25, 2010 9:27 pm
- Location: Southern New England, USA
- Last orgasm: April 1st, 2018
- Orgasms this year: 0
- Contact:
Re: Stainless steel Holy Trainer rings
The link doesn't allow viewing, probably because you linked from your shopping cart. Can you try copying the url from the original product page?
0 x
Tom Allen
The Edge of Vanilla
Denial Permanente
The Edge of Vanilla
Denial Permanente
- Tom Allen
- Site Admin
- Posts: 5426
- Joined: Sat Sep 25, 2010 9:27 pm
- Location: Southern New England, USA
- Last orgasm: April 1st, 2018
- Orgasms this year: 0
- Contact:
Re: Stainless steel Holy Trainer rings
Okay, one more HT question.
I'm now looking at this model:
http://www.dhgate.com/product/2017-late ... 19717.html
Those of you who wear the HT - do you leave your base rings on when you remove the cage? Does it act like a cock ring? How well does that work?
I'm now looking at this model:
http://www.dhgate.com/product/2017-late ... 19717.html
Those of you who wear the HT - do you leave your base rings on when you remove the cage? Does it act like a cock ring? How well does that work?
0 x
Tom Allen
The Edge of Vanilla
Denial Permanente
The Edge of Vanilla
Denial Permanente
Re: Stainless steel Holy Trainer rings
Tom, when I was wearing my HTv2, I'd take the ring off too. The edges of the fitting for the tube were uncomfortable for both of us.
0 x
- Tom Allen
- Site Admin
- Posts: 5426
- Joined: Sat Sep 25, 2010 9:27 pm
- Location: Southern New England, USA
- Last orgasm: April 1st, 2018
- Orgasms this year: 0
- Contact:
Re: Stainless steel Holy Trainer rings
Yeah, I've had enough responses to put me off the idea.
My second idea was to buy a cheap plastic version, and cut the tube, leaving only enough to fit back into the lock section. But that gets into fiddly stuff that is not sexy to be messing with.
My second idea was to buy a cheap plastic version, and cut the tube, leaving only enough to fit back into the lock section. But that gets into fiddly stuff that is not sexy to be messing with.
0 x
Tom Allen
The Edge of Vanilla
Denial Permanente
The Edge of Vanilla
Denial Permanente
-
- Posts: 14
- Joined: Wed Jan 31, 2018 4:07 am
Re: Stainless steel Holy Trainer rings
Did you finally buy this model? Did you like it?Tom Allen wrote:Okay, one more HT question.
I'm now looking at this model:
http://www.dhgate.com/product/2017-late ... 19717.html
Those of you who wear the HT - do you leave your base rings on when you remove the cage? Does it act like a cock ring? How well does that work?
0 x